water heaterMaintenance of sprinkler maintenance articles

    When using the head, if you find water or poor clogging, the nozzle can be removed with a screwdriver head cap screws at the center, remove the cap assembly (remember the location), with the inner surface of the toothbrush waste clean up debris. After cleared the cap assembly installed in order, to put a positive note, in case affect the results jets.

    Now, the water heater has been completely infiltrated our lives, many people will it be necessary appliances for the home essential life, since it is a necessity, loss and maintenance of all should pay attention to them, so water heaters have pay attention to what point? And how routine maintenance? The following Chinese electric water heater Network Interpretation routine maintenance for your water heater.

Daily Maintenance: head liner "two-pronged"

(1) head Maintenance: When using sprinklers, or if you find poor water clogging, the nozzle can be removed with a screwdriver head cap screws at the middle and remove the cap assembly (remember the location), waste with a toothbrush to clean the inner surface debris. After cleared the cap assembly installed in order, to put a positive note, in case affect the results jets.

(2) Liner Maintenance: To ensure the safe use of electric water heaters and interior life, in the case of long-term use can be through the safety valve of the tank water off, first turn off the water inlet valve, and then the water heater mixing valve to pull the hot water at the valve handle and then pull up to a horizontal position, when the water heater in the water will flow out through the pressure relief valve and flows through sewer drain pipe.

Water-saving tips

(1) In setting the water heater heating temperature, different temperatures to be set according to the season. Because summer water temperature and ambient temperature is high, the winter water temperature and ambient temperature is low, the use of the summer heat for 1-3 hours in advance, the water temperature in the range of 40 ℃ -60 ℃, winter use advance 3-5 hour heating, the water temperature is set within the range of 60 ℃ -75 ℃, which meets the requirements of the bath but also to achieve energy saving purposes.

(2) in their daily bath, hot water mixing valve will not ward off too much, to avoid wasting water. Pressure relief valve for big cause more cases of water, heating and usually best off when not motivated valve to save water.

(3) If the system of "TOU" that, according to the peak one day is divided into two billing periods, you can set the heating water heater in the low tariff periods, so you can save electricity.

Precautions

    When using the heater, the first not to be directed towards the outlet nozzle body, and pay attention to debugging water temperature to avoid scalding; note electrical outlet safe and dry, not wet hands socket.